If you have recently installed high pressure misting system or fogging system then you might need to consider regular checking and proper maintenance as these are the keys to make your system last for years while keeping the same efficiency as if you installed your system just last month.
We at coolerandheater.co ready to provide all the spare parts and maintenance for your misting systems in Dubai or any place in UAE.
There is periodic maintenance that is required to keep your pump and entire misting or fogging system running smoothly. Change the filter element in the pump annually to prevent sediment from entering the system. The pump oil should be changed every 500 hours of runtime or once every year. Use only 30W non detergent pump oil. When filling the oil, observe the oil sight glass and only fill to half way. Do not overfill.
To keep the nozzles spraying at full capacity, a yearly cleaning is recommended. Depending on the water supply, mineral deposits may form on the nozzle head inhibiting performance. Remove the rubber o-ring from the nozzle before placing the nozzle in any solution. This will extend the life of the o-ring and prevent dripping from your misting system. Then soak the nozzle in a Lime or Hard Water remover for about 5 minutes and rinse thoroughly. Replace the nozzles back into the system.
If there is a leak in your fogging system, the first “do it yourself” thing you need to do is clean the nozzles, if this doesn’t solve the problem you will need to contact a professional to locate the leak and fix it immediately as leakage in misting system will drop the efficiency of this system to less than a half. You can call us any time for any consultation and our team will do the needful.
